Euresys图像采集卡-Grablink DualBase

用于两个基本配置 Camera Link 相机的图像采集卡

  • 型号: Grablink DualBase
    特性一览:
  • 连接2路Camera Link Base 或Lite 配置相机

  • 直接兼容市场上数以百计的 Camera Link 相机

  • 支持 PoCL,通过 Camera Link 供电

  • ECCO:延长的 Camera Link 线缆长度

  • PCIe x4 总线:850 MB/s 持续传输带宽

  • 特征丰富的 20 条数字 I/O 线

  • Memento 事件日志工具

Mechanical
FormatStandard profile, half length, 4-lane PCI Express card
Cooling methodAir-cooling, passive heatsink
MountingFor insertion in a standard height, 4-lane or higher, PCI Express card slot
Connectors
  • 'A' on bracket:

    • 26-position Shrunk Delta Ribbon (SDR) socket

    • Camera Link Camera A

  • 'B' on bracket:

    • 26-position Shrunk Delta Ribbon (SDR) socket

    • Camera Link Camera B

  • 'EXTERNAL I/O' on bracket:

    • 26-pin 3-row high-density female sub-D connector

    • I/O lines and power output

  • 'INTERNAL I/O A on PCB:

    • 26-pin 2-row 0.1" pitch pin header with shrouding

    • I/O lines of camera A and power output

  • 'INTERNAL I/O B on PCB:

    • 26-pin 2-row 0.1" pitch pin header with shrouding

    • I/O lines of camera B and power output

  • 'POWER INPUT' on module:

    • 4-pin MOLEX power socket

    • 12 VDC power input for PoCL cameras and I/O power

DimensionsL 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
Weight137 g, 4.83 oz
Host bus
StandardPCI Express 1.0
Link width4 lanes
Link speed2.5 GT/s (PCIe 1.0)
Maximum payload size1024 bytes
DMA32- and 64-bit
Peak delivery bandwidth1,024 MB/s
Effective (sustained) delivery bandwidth
  • Up to 833 MB/s for a PCI Express payload size of 256 bytes and 64-bit addressing

  • Up to 844 MB/s for a PCI Express payload size of 256 bytes and 32-bit addressing

  • Up to 754 MB/s for a PCI Express payload size of 128 bytes and 64-bit addressing

  • Up to 780 MB/s for a PCI Express payload size of 128 bytes and 32-bit addressing

Power consumptionMax.7.2 W; Typ. 6.0 W (0.47 A @ 3.3V;0.37 A @+12V)
Camera / video inputs
Interface standard(s)Camera Link 2.0
Connectors2 Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL)
ECCO - Extended Camera Link Cable OperationECCO
Number of camerasTwo Base or Lite cameras
Line-scan cameras supportedYes
Maximum aggregated camera data transfer rate4.08 Gbit/s (510 MB/s)
Camera Link configurationBase or Lite
Camera Link clock frequencyFrom 20 MHz up to 85 MHz
PoCL (Power over Camera Link)One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protections
Camera types
  • Gray-scale and color (RGB and Bayer) cameras

  • Area-scan and line-scan cameras

Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.

  • Support of camera exposure/readout overlap.

  • Support of external hardware trigger, with optional delay and trigger decimation.

Strobe
  • Accurate control of the strobe position for strobed light sources.

  • Support of early and late strobe pulses.

Line-scan camera control
Scan/page trigger
  • Precise control of start-of-scan and end-of-scan triggers.

  • Support of external hardware trigger, with optional delay.

  • Support of infinite acquisition, without missing line, for web inspection applications.

Line trigger
  • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.

  • Rate Converter tool for fine control of the pixel aspect ratio.

  • Rate Divider tool

Line strobe
  • Accurate control of the strobe position for strobed light sources.

On-board processing
On-board memory128 MB (64 MB for image data)
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb

Input LUT (Lookup Table)
  • Monochrome: 8-bit, 10-bit or 12-bit per pixel, up to 500 MPixel/s per camera

  • RGB: 3x8-bit per pixel, up to 125 MPixel/s per camera

Bayer CFA to RGB decoder
  • Advanced interpolation method using average and median functions on a 3x3 kernel

  • Up to 125 MPixel/s per camera

General Purpose Inputs and Outputs
Number of lines2 sets of 10 I/O lines, each set including:
  • 2 differential inputs (DIN)

  • 4 isolated inputs (IIN)

  • 4 isolated outputs (IOUT)

Usage
  • Each acquisition channel has a dedicated set of 10 I/O's

    • The I/O set of INTERNAL IO CONNECTOR A is dedicated to the acquisition channel of CAMERA A

    • The I/O set of INTERNAL IO CONNECTOR B is dedicated to the acquisition channel of CAMERA B

  • The input lines of an I/O set can be used by the corresponding acquisition channel as:

    • Camera frame trigger source (area-scan only)

    • Acquisition sequence trigger source (area-scan only)

    • Camera line trigger source (line-scan only)

    • Page acquisition trigger source (line-scan only)

    • Page acquisition end trigger source (line-scan only)

    • (Quadrature) motion encoder input (line-scan only)

  • The IOUT 1 output line of an I/O set can be used by the corresponding acquisition channel, as:

    • Illumination strobe output

  • All the input lines can be used as general purpose inputs

  • All the output lines can be used as general purpose outputs

Electrical specifications
  • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers

  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers

  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads

Filter control
  • Glitch removal filter available only on input lines used as trigger sources

  • Configurable with five time constants:

    • 100 ns, 500 ns, and 2.5 µs for trigger / page trigger / page end trigger sources

    • 40 ns, 100 ns, 200 ns, 500 ns, 1 µs, 5 µs, 10 µs for line trigger sources

Power outputNon-isolated, +5V, 1A and +12V, 1A, with electronic fuse protection
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures

  • Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures

Refer to release notes for details
APIs
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers

Memento event logging toolYes
Environmental conditions
Operating ambient air temperature0 to +50 °C / +32 to +122 °F
Operating ambient air humidity10 to 90% RH non-condensing
Storage ambient air temperature-20 to +70 °C / -4 to +158 °F
Storage ambient air humidity10 to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC

  • United States FCC rule 47 CFR 15

EMC - Emission
  • EN 55022:2010 Class B

  • FCC 47 Part 15 Class B

EMC - Immunity
  • EN 55024:2010 Class B

  • EN 61000-4-2

  • EN 61000-4-3

  • EN 61000-4-4

  • EN 61000-4-5

  • EN 61000-4-6

KC CertificationKorean Radio Waves Act, Article 58-2, Clause 3
FlammabilityPCB compliant with UL 94 V-0
RoHSEuropean Union Directive 2015/863 (ROHS3)
REACHEuropean Union Regulation 1907/2006
WEEEMust be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description
Optional accessories1625 - DB25F I/O Adapter Cable