Euresys CoaXPress 图像采集卡-Coaxlink Octo

PCIe 3.0 八路 CoaXPress 图像采集卡

  • 型号: Coaxlink Octo
特性一览:
  • 8路CoaXPress CXP-6 连接:5,000 MB/s 相机带宽

  • 将最多 8 个 CoaXPress 相机连接到一张卡上

  • PCIe 3.0 (Gen 3) x8 总线:6,700 MB/s 总线带宽

  • 特征丰富的 10 条数字 I/O 线

  • 丰富的相机控制功能

  • Memento 事件日志工具

    图片关键词

PCIe 3.0 (Gen 3) x8 总线 

  • 7,800 MB/s 峰值总线带宽

  • 6,700 MB/s 持续总线带宽

图片关键词

提供 Windows 和 Linux 驱动程序

包括支持用于Linux的AArch64 64位ARM架构


长线缆支持

  • CXP-6 速度时 40 米 (6.25 Gbps)

  • CXP-3 速度时 100 米 (3 Gbps)


  • Mechanical
    FormatStandard profile, half length, 8-lane PCI Express card
    Cooling methodAir cooling, fan-cooled heatsink
    MountingFor insertion in a standard height, 8-lane or higher, PCI Express card slot
    Connectors
    • 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' on bracket:

      • 8x DIN 1.0/2.3 female connectors

      • CoaXpress host interface

    • 'INTERNAL I/O' on PCB:

      • 26-pin 2-row 0.1" pitch pin header with shrouding

      • I/O lines and power output

    • 'I/O EXTENSION' on PCB:

      • 26-pin 2-row 0.05" pitch pin header with shrouding

      • I/O extension lines and power output

    • 'AUXILIARY POWER INPUT' on PCB:

      • 6-pin PEG power socket

      • 12 VDC power input for PoCXP camera(s) and I/O power

    • 'C2C-LINK' on PCB:

      • 6-pin 2-row 0.1-in header

      • Card to card link

    LED indicators
    • 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' on bracket:

      • 8x bi-color red/green LEDs

      • CoaXPress Host connector indicator lamps

    • 'FPGA STATUS LAMP' on PCB:

      • Bi-color red/green LED

      • FPGA status lamp

    • 'BOARD STATUS LAMP' on PCB:

      • Bi-color red/green LED

    Switches'RECOVERY' on card PCB:
    • 3-pin 1-row 0.1" header

    • Firmware emergency recovery

    DimensionsL 167.65 mm x H 111.15 mm L 6.6 in x H 4.38 in
    Weight189 g, 6.67 oz
    Host bus
    StandardPCI Express 3.0
    Link width
    • 8 lanes

    • 1 lane, 2 lanes or 4 lanes with reduced performance

    Link speed
    • 8.0 GT/s (PCIe 3.0)

    • 5.0 GT/s (PCIe 2.0) with reduced performance

    Maximum payload size512 bytes
    DMA32- and 64-bit
    Peak delivery bandwidth7,800 MB/s
    Effective (sustained) delivery bandwidth6,700 MB/s (Host PC motherboard dependent)
    Power consumptionTyp. 22 W (TBD W @ +3.3V,TBD W @ +12V), excluding camera and I/O power output
    Camera / video inputs
    Interface standard(s)CoaXPress 1.0, 1.1 and 1.1.1
    Connectors8x DIN1.0/2.3 75 Ohms CXP-6
    Status LEDsOne CoaXPress Host connection status LED per connector
    Number of camerasDetermined by the selected firmware variant:
    • Area-scan cameras:

      • One 1- or 2- or 4- or 8-connection camera

      • One or two 1- or 2- or 4-connection cameras

      • Up to four 1- or 2-connection cameras

      • One 1- or 2- or 4-connection camera and up to four 1-connection cameras

      • Up to eight 1-connection cameras

    • Line-scan cameras:

      • One 1- or 2- or 4- or 8-connection camera

      • One or two 1- or 2- or 4-connection cameras

      • Up to four 1- or 2-connection cameras

    Line-scan cameras supportedYes
    Maximum aggregated camera data transfer rate50 Gbit/s (5,000 MB/s)
    Supported CXP down-connection speeds1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6)
    Number of CXP data streams (per camera)1 data stream per camera
    Maximum CXP stream packet size16,384 bytes
    PoCXP (Power over CoaXPress)
    • PoCXP Safe Power:

      • 17 W of 24V DC regulated power per CoaXPress connector

      • PoCXP Device detection and automatic power-on

      • Overload and short-circuit protections

    • On-board 12V to 24V DC/DC converter

    • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable

    Camera typesDetermined by the selected firmware variant:
    • Area-scan cameras for all but 'line-scan' firmware variants:

      • Gray-scale and color (YCbCr, YUV, RGB and Bayer CFA)

      • Single-tap (1X-1Y) progressive-scan

    • Line-scan cameras and contact imaging sensors for 'line-scan' firmware variants:

      • Gray-scale and color RGB

    Camera pixel formats supportedRaw, Monochrome, Bayer, RGB, and RGBA (PFNC names):
    • Raw

    • Mono8, Mono10, Mono12, Mono14, Mono16

    • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG

    • RGB8, RGB10, RGB12, RGB14, RGB16

    • RGBA8, RGBA10, RGBA12, RGBA14, RGBA16

    • YCbCr601_422_8, YCbCr601_422_10

    • YCbCr709_422_8, YCbCr709_422_10

    • YUV422_8, YUV422_10

    Area-scan camera control
    Trigger
    • Precise control of asynchronous reset cameras, with exposure control.

    • Support of camera exposure/readout overlap.

    • Support of external hardware trigger, with optional delay and trigger decimation.

    Strobe
    • Accurate control of the strobe position for strobed light sources.

    • Support of early and late strobe pulses.

    Line-scan camera control
    Scan/page trigger
    • Precise control of start-of-scan and end-of-scan triggers.

    • Support of external hardware trigger, with optional delay.

    • Support of infinite acquisition, without missing line, for web inspection applications.

    Line trigger
    • Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation.

    • Rate Converter tool for fine control of the pixel aspect ratio: Rate Conversion Ratio in the range 0.001 to 1000 with an accuracy better than 0.1%.

    • Rate Divider tool

    Line strobe
    • Accurate control of the strobe position for strobed light sources.

    On-board processing
    On-board memory2 GB
    Image data stream processing
    • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb

    • Optional swap of R and B components

    • Little endian conversion

    Input LUT (Lookup Table)Only available for monochrome cameras:
    • 8 to 8 bits

    • 10 to 8, 10 or 16 bits

    • 12 to 8, 12 or 16 bits

    Flat-field correctionOnly available with the '2-camera' firmware variant
    Bayer CFA to RGB decoderOnly available with the '1-camera' and the '2-camera' firmware variants
    Data stream statistics
    • Measurement of:

      • Frame rate (Area-scan only)

      • Line rate

      • Data rate

    • Configurable averaging interval

    CustomLogic firmware variants
    • 1-camera, customlogic firmware variant

      • one 1- or 2- or 4-connection area-scan camera

      • 91% DSP, 84% FF, 75% LUT and 62% BRAM resources of the Xilinx Kintex Ultrascale XCKU035 FPGA available for user programming

      • 2GB capacity, 12GB/s bandwidth, shared on-board DRAM memory

    Event signaling and counting
    • The application software can be notified of the occurrence of various events:

      • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers

      • A large set of custom events

    • Custom events sources:

      • I/O Toolbox events

      • Camera and Illumination control events

      • CoaXPress data stream events

      • CoaXPress host interface events

    • Each custom event is associated with a 32-bit counter that counts the number of occurrences

    • The last three 32-bit context data words of the event context data can be configured with event-specific context data:

      • Event-specific data

      • State of all System I/O lines sampled at the event occurrence time

      • Value of any event counter

    General Purpose Inputs and Outputs
    Number of lines10 I/O lines on INTERNAL I/O connector:
    • 2 differential inputs (DIN)

    • 2 singled-ended TTL inputs/outputs (TTLIO)

    • 4 isolated inputs (IIN)

    • 2 isolated outputs (IOUT)

    NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector.
    Usage
    • Any I/O input lines can be used by any LIN tool of the I/O Toolbox

    • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder

    • The LIN and QDC tools outputs can be further processed by the other tools (DIV, MDV, DEL) of the I/O toolbox to generate any of the following "trigger" events:

      • The "cycle trigger" of the Camera and Illumination controller

      • The "cycle sequence trigger" of the Camera and Illumination controller

      • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)

      • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)

    Electrical specifications
    • DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers

    • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers

    • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers

    • IOUT: Isolated contact outputs compatible with 30V / 100mA loads

    Filter control
    • Glitch removal filter available on all System I/O input lines

    • Configurable filter time constants:

      • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs

      • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs

    Polarity controlYes
    Power output
    • From AUXILIARY POWER connector to INTERNAL I/O and I/O EXTENSION connectors:

      • Non-isolated +12V, 1A, with electronic fuse protection

    • From PCI Express connector io I/O EXTENSION connector:

      • Non-isolated, +3.3V, unprotected

    I/O Toolbox toolsThe I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware-dependent.
    • Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line.

    • Quadrature Decoder tool (QDC): A composite tool including:

      • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.

      • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.

      • A 32-bit up/down counter for delivering a position value.

    • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.

    • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.

    • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).

    • User Actions Scheduler tool (UAS): to delegate the execution of User Actions at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.

    I/O Toolbox compositionDetermined by the selected firmware variant:
    • 1-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS

    • 1-camera, line-scan: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS

    • 2-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS

    • 2-camera, line-scan: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS

    • 4-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS

    • 4-camera, line-scan: 8 LIN, 4 QDC, 4 DIV, 4 MDV, 4 DEL, 1 UAS

    • 5-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS

    • 8-camera: 8 LIN, 1 QDC, 1 DIV, 1 MDV, 2 DEL, 1 UAS

    C2C-Link
    Description
    • Allows to accurately synchronize the trigger and start-of-exposure of multiple grabber-controlled area-scan cameras.

    • C2C-Link is able to synchronize cameras connected

      • to the same Coaxlink card

      • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)

      • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)

    Specification
    • Maximum distance

      • 60 cm inside a PC

      • 1200 m cumulated adapter to adapter cable length

    • Maximum trigger rate

      • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length

      • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length

    • Trigger propagation delay from master to slave devices

      • Less than 10 ns for cameras on the same Coaxlink card or on different Coaxlink cards in the same PC

      • Less than 265 ns for cameras on different Coaxlink cards in different PCs (3 PCs and 40m total C2C-Link cable length)

    Software
    Host PC Operating System
    • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures

    • Linux for x86 (32-bit), x86-64 (64-bit) and aarch64 (64-bit) processor architectures

    • macOS for x86-64 (64-bit) processor architecture

    Refer to release notes for details
    APIsEGrabber class, with C++ and .NET APIs:
    • .NET assembly designed to be used with development environments compatible with .NET frameworks version 2.0 or higher

    GenICam GenTL producer libraries compatible with C/C++ compilers:
    • x86 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86 applications

    • x86_64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86_64 applications

    • aarch64 dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of aarch64 applications

    Memento event logging toolYes
    Environmental conditions
    Operating ambient air temperature0 to +55 °C / +32 to +131 °F
    Operating ambient air humidity10 to 90% RH non-condensing
    Storage ambient air temperature-20 to +70 °C / -4 to +158 °F
    Storage ambient air humidity10 to 90% RH non-condensing
    Certifications
    Electromagnetic - EMC standards
    • European Council EMC Directive 2004/108/EC

    • United States FCC rule 47 CFR 15

    EMC - Emission
    • EN 55022:2010 Class B

    • FCC 47 Part 15 Class B

    EMC - Immunity
    • EN 55024:2010 Class B

    • EN 61000-4-3

    • EN 61000-4-4

    • EN 61000-4-6

    KC CertificationKorean Radio Waves Act, Article 58-2, Clause 3
    FlammabilityPCB compliant with UL 94 V-0
    RoHSEuropean Union Directive 2015/863 (ROHS3)
    REACHEuropean Union Regulation 1907/2006
    WEEEMust be disposed of separately from normal household waste and must be recycled according to local regulations